I made my first ham contact last night on the Ham Nation show. Man was I nervous. Fortunately I had three 25+ year to coach me. Matt KE6LPO of the Redwood Empire DXers was driving down the street outside (I think this might have been a set up!) and was the first to respond to my CQ. I understand there was quite a pile up a minute or two later as more than 25 hams tried to say hello!
Thanks everyone. It’s great to be a ham!
It’s kind of cool to have video of my first ham contact!
CQ CQ CQ Calling all hams! We’re having an open house at our new TWiT Brick House Studios August 20 and 21 and you’re invited.
A special event station will be active on 40 and 20 meters afternoon and evenings commemorating the official opening of the new TWIT studios of Leo Laporte, W6TWT. Tours of the new studios and classic Collins AM broadcast station will be available 10AM – 10 PM Saturday and 10AM to 5p Sunday to all Amateur Radio operators. The TWIT Brick House studios are located at 140 Keller St. in Petaluma, CA.
The call sign to be used will be W6KB, the Redwood Empire DX Association whose members have been instrumental in the planning and installation of the antenna system during the final construction of the new broadcast studios, home of the HAMNation netcast which is produced each Tuesday night hosted by Bob Heil K9EID, Gordon West WB6NOA, and George Thomas W5JDX.
The radios will include the IC-9100, IC-7800, and IC-7200, all courtesy Icom America and mics from Heil Sound. We’ll broadcast a preview of the new gear tomorrow night at 6p Pacific/9p Eastern on HAM Nation.
QSL direct to W6TWT, P.O. Box 1018 in Petaluma, CA 94953 or firstname.lastname@example.org.
Last Saturday members of the Redwood Empire DX club under the direction of ARRL Section Chief, Bill Hillebrand KH6GJV, installed temporary antennas on the roof of the TWiT Brick House Studios to prepare for our ham weekend, 19-21 August 2011.
On Friday, the antenna team from the Redwood Empire DX Association (REDXA) got together at one of the team member’s home to gather all parts, pre-assemble and dry-fit all parts. They spent the better part of the day getting everything ready. The VHF/UHF antenna provided by Comet arrived on time.
This morning, the team gathered at the TWIT studios at 8:00 AM and went right to work. Expecting the studio to go live at 11:00 AM, the team worked quickly, but carefully, to get the job done in time. The antenna feed lines were pushed down the conduit into the studio. Then the HF antenna was assembled by part of the team while the others put together the temporary tripod support structure non-invasively on the roof. The HF antenna was mounted on the tripod and final tuning adjustments were made. The VHF/UHF vertical was assembled and C-clamped to a structural element. The whole job was done by 10:30 AM.
The feed line ends are appropriately marked and are resting on the table for the station ready to be used.
Stand by for details on this weekend’s Special Event!
Starting today and every Tuesday from here on out, I’ll be joining Gordon West WB6NOA and Bob Heil K9EID on HAM Nation, TWiT’s show for amateur radio enthusiasts. We broadcast live at 6p Pacific/9p Eastern/0100 Tuesdays UTC on live.twit.tv but you can always download audio and video of the show any time after the show from the TWiT web site, iTunes, and wherever better podcasts are
I’ve registered W6TWT.org, W6TWT.com, and W6TWT.net. If you enter any of those URLs you’ll arrive here – my ham related postings on Leoville. That seems easier than setting up an entirely new page, at least for now. And you can email me regarding ham stuff at email@example.com.
I’ve also created a Twitter account for my call sign: @W6TWT. Not sure how I’ll use it, but better me than someone else.
It’s official. The FCC has assigned me my new call sign: KJ6QGP. I immediately applied for a vanity call sign.
These handy-talkies are dual-band: VHF/UHF, the frequencies most suitable for Technicians. And since there are lots of FM repeaters in the mountains near Petaluma, there’s lots I can do with them. Not that I have yet.
I bought the Icom because it does D-Star, a packet-based digital voice and data protocol that’s new and gaining popularity. The Kenwood was Gordon West WB6NOA’s recommendation because it supports APRS, IRLP, Echo-Link and other popular digital technologies.
One of these days I’ll actually give them a try.
I passed the Technician exam at the MDARC meeting in Lafayette! I am officially a ham. I’ll be back next month to take the General exam.
Here I am with the Volunteer Examiners after passing. Great bunch of guys!
Radio corner at the new TWiT Brick House Studios – note the lack of actual radios but one genuine, soon-to-be, ham.